Welcome, visitor! [ Register | LoginRSS Feed  |   | 


For urgent enquiries, please call NEW NUMBER +44 (0) 117 244 93 53



WindMaster 750 EG Used Wind Turbines For Sale – 750KW

  • City: Warsaw
  • Country: Poland
  • Listed: 30/12/2011 1:07 AM
  • Expires: This ad has expired
WindMaster 750 EG Used Wind Turbines For Sale - 750KW - Image 1WindMaster 750 EG Used Wind Turbines For Sale - 750KW - Image 2WindMaster 750 EG Used Wind Turbines For Sale - 750KW - Image 3



If contract signed before 2012 for minimum of 2 units – Special bargain Price at only 50,000 EUR ($67,700 USD) per unit.


For immediate Sale – 6 used WindMaster 750kW (50hz) wind turbines left at this price. Can ship anywhere in the world

Only€65,000 EUR ($83,000 USD) per unit! OR NEAREST OFFER

-As is – Where is-

6 x WindMaster 750kw (50Hz)



These immediately available WindMaster 750 EG are MADE IN HOLLAND and were in operation in Holland producing many years of high profitable revenue for Holland’s largest utility company – High quality maintenance until decommissioned – refurbished blades where necessary – currently in stock in Poland for planned export to the Middle East – Far East – Africa or South America and Australasia



WindMaster 750-EGModel : 750 EG – 750KW

Year of build : 1998

Price : €65,000 EUR ($83,000 USD) OR NEAREST OFFER

Number of units available: 6 units left at this price

Blades are fully refubished and newly balanced!

Current Location: Eastern Europe

Already dismantled and ready to ship!

All 6 turbines can be delivered in refurbished condition.

The wind turbines come complete for on-grid operation.

Minimum order quantity: 1

WindMaster 750kW Wind Turbine nacelle

Don’t miss this amazing offer!

This is a one time opportunity for any buyer to either up your existing wind farm by a massive 6.5MW or for the construction of a new wind farm project for a fraction (25%) of the price which a farm would cost if equipped with brand new turbines.

WindMaster 750-E

Number of turbines: 6 available immediately


WindMaster 750kW before dismantling
WindMaster 750kW before dismantling


WindMaster 750/43

Rotor diameter: 43,4 m



WindMaster 750kW Wind Turbine blades

  • Generator capacity: 750 kW

  • Shaft level: 48,2 m

  • Working range: 4,5-19 m/s

  • 750 kWe at: 13 m/s

  • Year of commissioning : 1998


Yearly production at 6 m/s* : 1.150.000 kWh/year/turbine**

Yearly production at 7 m/s* : 1.684.000 kWh/year/turbine**

Yearly production at 8 m/s* : 2.184.000 kWh/year/turbine**

*10 min average values, according IEA standards on hub (shaft) height

** Weibull factor k=2; 100% availability


Storage of blades Goole


Rotor blades and rotor

Number of blades : 2

Material: wood-epoxy-laminate

Tip speed: 73 m/s

Blade length: 20,268 m

Rotation speed: 32 rpm

Rotor surface: 1.480 m²


Make: AEG or ABB

Rating: 110% of 750 kW continuously ( 1000kW max.)

Type: Squirrel cage asynchronous generator 4 pole

Compensation: 125 kVAR fixed.

Rotation speed: 1.509 rpm

Protection class: IP55

Safety device: 3 PTC’s

Voltage: 660 V

Connection to grid: First connection at speed of 1495 rpm via resistors, next step directly connected, 2 circuit breakers, star connected

Gear box

Make: Flender AG, Germany or Jahnel Kesterman

System: parallel, 3- stagesTransmission: 1: 46,5Oil contents: 320LLubrication: electrical pump

Yaw system Type: free yaw, active yaw back-up.

Motors: 2 hydraulic low speed motors each with gear drive,

Nacelle support : 4-piont ball bearing on toothed wheel

Cable twist control: sensor + computer

Power supply: hydrolic unit A, 3 kW

Angle control: wind vane

Brake system

Type: hydraulically activated disc brake at low speed shaft

Disc diameter: 1,6 m

Numbers of callipers:8

Normal brake time: 4 sec

Activation: overspeed sensors

Power supply: hydraulic Unit A; 3 kW

Pitch system

Type: crank mechanism inside hub: pitch shaft through hollow mainshaft: axial bearing and hydraulic cylinder

Power supply : Hydraulic Unit B, 5,5 kW

Safety system : fail-safe emergency valves and accumulator system

Control system: digital stroke transducer and computer controlled valve


Tower height: 47m – 1 section (can be cut for easier transportation)

Construction: 1 conic round part

Top part with noise damper and flange.

Foundation bolds: 2×30 pieces, M42; 100 cm long, bolded in 40mm steel ring in steel armoured concrete foundation.

Bold circles: 2,8 m/2,4 mPlatforms: 4; on 3m, 6m, 23m, 43m

Top platform: oil tight

Bottom platforms: fire tight

Cables: carefully tagged and fixed over cable reel in bottom part of tower

Ladders: equipped with safety rail



Rotor: 12.800 kg

Rotor blades: 2.500 kgTurbine head excluding rotor: 35.700 kg

Tower: 40.500 kgTotal weight installed: 89.000 kg


Power control: active pitch control

Breaking system: active pitch control and disk break on main shaft.Microprocessor: Mitsubishi

±2,5 and ± 5% off load tap changer

HV Bushings: Elastimold type M 400 AR-3/jLV bushings: DIN 1/1000 A directly connected to cables.Each windmill connected to central distribution rail.Tower to be hoisted over transformer.

Documentations Available

  • Full Service History
  • Electrical drawings
  • Mechanical construction drawings
  • Maintenance manuals
  • Log books



Can ship anywhere in the world

Only €65,000 EUR ($83,000 USD) per unit! – OR NEAREST OFFER -As is – Where is-

Contact us immediately not to miss out!!!!

Contact Ad owner for quick sale

Note:  Seller can assist and arrange shipping.

Viewings will only be arranged if signed LOI (Letter of Intention) has been received.

Time wasters and tire kickers will not be accomodated!


Above technical data is subject to technical alterations, errors and omissions

1. Wind turbine installation is highly customized according to location, set-up, seismic conditions, soil, zoning, local restrictions, and many other factors

2. Taxes, Containerizing and Shipping is not included. Estimates do not include export and other international fees.

3. This information should be used for general budgetary reasons only.

4. Pricing and availability is subject to change at any time without notice

5. The displayed location in the ‘Google Maps’ section of this advert only indicates the approximate location of the equipment6. Please refer to our full terms & conditions. Click here!

Ad Reference ID: 2704ed3cd7800fa5

To inquire about this ad listing, complete the form below to send a message to the ad poster.

  1. Warning: A non-numeric value encountered in /homepages/4/d226096371/htdocs/it.mywindpower/wp-content/themes/classipress/includes/sidebar-contact.php on line 68

    Warning: A non-numeric value encountered in /homepages/4/d226096371/htdocs/it.mywindpower/wp-content/themes/classipress/includes/sidebar-contact.php on line 68

Turbine Gallery

hitwind logo wind gallery

HITWIND Turbine Gallery!

Beautiful Wind Turbine images in high quality resolution

© 2017 MWPS World

Today Special Offer

MWPS Global Services

MWPS Global Professional Services

Corporate Asset Recovery 

MWPS UK Division

Special Offers by SHOP VESTAS Offers – Huge Discounts on many Vestas Parts

Shop Vestas logo

Genuine OEM Wind Turbine Spare Parts – V16 to V120 – Fast Turnaround – Ask for Quotations